9787

Jul 17, 2015, 00:40 AM
MODEL A1W-3 POWER UNIT SHIPPING CONTAINER (PUSC). THE PACKAGE, IS A RIGHT CIRCULAR CYLINDRICAL STEEL WELDMENT. A MODULE SUPPORT DEVICE, A PUNCTURE PROTECTION COVER, & AN ENERGY ABSORBER ARE ATTACHED TO THE TOP END OF THE PACKAGE. THE MODULE SUPPORT DEVICE IS SECURED TO THE POWER UNIT ADAPTER FLANGE WITH TWO 3-INCH DIAMETER SHIPPING STUDS AND IS BOLTED TO THE UPPER CLAMP AND CRADLE ASSEMBLY WITH FORTY 2.25-INCH DIAMETER ASSEMBLY STUDS. MODULE SUPPORT CYULINDERS (WITH LOCKING NUTS) AND CONTROL ROD HOLDDOWN DEVICES PREVENT FUEL MODULE OR CONTROL ROD MOTION. THE TOP PUNCTURE PROTECTION COVER, WITH 4-INCH THICK STEEL SIDE WALLS AND A 5-INCH THICK STEEL TOP PLATE, FITS DOWN OVER THE EGGCRATE ASSEMBLY AND ATTACHES TO THE BOTTOM PLATE OF THE MODEL SUPPORT DEVICE WITH FORTY 2-INCH DIAMETER BOLTS. THE TOP ENERGY ABSORBER, WITH AN 80-INCH OUTER DIAMETER, A 54-INCH INNER DIAMETER, AND A HEIGHT OF 25 INCHES IS WELDED TO THE TOP PUNCTURE PROTECTION COVER. AT THE BOTTOM END OF THE A1W-3 PUSC, A 4-INCH THICK STEEL PUNCTURE PROTECTION PLATE WITH A DIAMETER OF 50.5 INCHES IS ATTACHED TO THE BOTTOM OF THE POWER UNIT THERMAL SHIELD BY 8 SETS OF U-BOLTS. A BOTTOM ENERGY ABSORBER, WITH AN 89.25 INCH OUTER DIAMETER, A 52.5 INCH INNER DIAMETER, AND A HEIGHT OF 36 INCHES COVER THE BOTTOM PUNCTURE PROTECTION PLATE AND IS ATTACHED TO THE THERMAL SHIELD OF THE POWER UNIT W/12 0.875 INCH DIAMETER BOLTS. SUPPORT BARREL AND SS PLUG/BAND ASSEMBLY AROUND OUTSIDE OF SUPPORT BARREL; ON 300-TON RAILCAR.
Certificate no:
USA/9787/B(U)F
Package Type:
B
Historical Flag:
N
Doe Flag:
N



Office of Environmental Management

1000 Independence Ave. SW
Washington DC 20585
202-586-7709

Federal Government