9009

MODEL FL 10-1. TWO 16 GAUGE 55 GALLON DRUMS WELDED END TO END, APPROX. 68 INCHES LONG AND 22-1/2 INCHES IN DIAMETER. THE OUTER DRUM CLOSURE SHALL BE ACCOMPLISHED BY AT LEAST A 12-GAUGE BOLT-LOCKING RING WITH DROP-FORGED LUGS, ONE OF WHICH IS THREADED TO RECEIVE AT LEAST A 5/8 - INCH DIAMETER BOLT AND LOCK NUT. THE PRESSURE VESSEL SUPPORT CONSISTS OF WOOD SUPPORTS, STEEL INNER SLEEVE AND NUT RING TO RECEIVE THE CONTAINMENT VESSEL, AND FIRE RESISTANT PHENOLIC FOAM, FORMED IN PLACE TO AN AVERAGE FINISHED DENSITY OF AT LEAST 8 POUNDS PER CUBIC FOOT FOR THE MAIN BODY AND 10 POUNDS PER CUBIC FOOT FOR THE CAP. GAS RELIEF HOLES SHALL BE PROVIDED IN THE OUTER STEEL DRUM. THE CONTAINMENT VESSEL IS A 304L STAINLESS STEEL 5-INCH SCHEDULE 40 PIPE, APPROX. 53-1/2 INCHES LONG, WITH A 304L SS 1/2-INCH THICK WELDED BOTTOM PLATE AND A 304L SS 300 LBS. SLIP-ON FLANGE AND BLIND FLANGE WHICH IS FASTENED BY EIGHT, 3/4-INCH STEEL BOLTS. THE FLANGE CLOSURE IS GASKETED BY TWO FLUOROELASTOMER O-RINGS WITH A PRESSURE TAP BETWEEN THE TWO O-RINGS GROOVES. DURING SHIPMENT, THE O-RING GROOVE PRESSURE TAP IS SEALED WITH A PIPE PLUG WITH THREADS WRAPPED IN TEFLON TAPE. A 1/4-INCH SS VALVE IS SCREWED INTO THE BLIND FLANGE OF THE CONTAINMENT VESSEL. THE VALVE IS SEALED BY A PIPE CAP (THREADS) WRAPPED WITH TEFLON TAPE) AND IS PROTECTED BY A 2-1/2-INCH HIGH SECTION 5-INCH SCHEDULE 40 PIPE WELDED TO THE TOP OF THE FLANGE. THE PACKAGING HAS A MAX. GROSS WEIGHT OF 515 LBS.